Top Menu

Water Management System Options

WATER MANAGEMENT SYSTEM OPTIONS

ENVIRO-PORT® 8,000 GALLON AGITATION TANK

Dimensions: 14’4″ diameter x 6’7″ high

Residual Water Tank Construction: Tank wall 1/4″ A-36 plate; Tank floor 5/16″ A-36 plate; Agitator (1) Direct Drive Speed Reducer.

Shipping weight 15,600 lbs.

ENVIRO-PORT® 17,000 GALLON AGITATION TANK

Dimensions: 14’4″ x 27’4″ oval x 6’7″ high

Residual Water Tank Construction: Tank wall 1/4″ A-36 plate; Tank floor 5/16″ A-36 plate; Agitators (2) Direct Drive Speed Reducer.

Shipping weight 33,000 lbs.

Batch Plant Priority Pump Option: To pump residual water to batch plant. Option includes 3-M, and 4-M pump with 10 H.P. and 15 H.P. drive; two-piece butterfly pneumatic actuated valve with instant on/off control; completely pre-wired electrical system with auto cycle mode control; completely plumbed to the ENVIRO-PORT® System.

  • 2 H.P. Air Compressor system. Pre-wire and Pre-plumbed to the ENVIRO-PORT® system. Service disconnect box included and installed.
  • Submersible 3″ discharge trash pump: Complete with 7.5 H.P. motor; Motor starter and service disconnect box; two 3″ Butterfly valves; This pump is used to agitate customer’s pit system and then transfer residual water to ENVIRO-PORT System.
  • 4″ Maglite flow-meter with rubber liner. With one pulse per gallon/liter dry contact. (Note: This item needed for metered water batching.)
  • Automation features: On screen monitoring residual water density; Residual water density transmitted to customer’s batch computer; On screen tank levels;motor status;Access to all timers and monitor screens; On screen residual water temperature. Hardware Used: PLC; HMI for monitor and control screen; Temperature transmitter; and Density Meter.